China Bus Coach Front Axles Bus Parts Rear Axle Half Shaft for Electric Motor Drive Axle drive shaft yoke

Merchandise Description

The illustration of Rear Axle

 

Suspension Design

AR115

 

 

Rated load(kg)

115000

Brake Sort

Disc/Drum

Rim Distance(mm)

1832

Max out Torque(Nm)

30000

Distribution Circle

ten*335

Flange Kind

Basic Flange

Ratio

3.fifteen~6.17

Relevant Bus

7m Bus

Wheel Hub Type

Bearing Device

Weight(oil incorporated)(kg)

690()Drum)/630(Disc)

The Detailed Drawing of Described Rear Axle

Kind: Front AXLEAF 2.2~2.7                                                                                                   Type: Front AXLE–AF 5.5

Software: five~7 m Mentor/Metropolis Bus                                                                                               Application: 10~eleven m Mentor/Metropolis Bus

                                                                  

Sort: Entrance AXLE–AF 75                                                                                            Sort: REAR AXLE–AR forty

Application: More than 11 m Coach/Metropolis Bus                                                                       Software: 5~8m Mentor/Metropolis Bus
Economy of The Axle and Suspension

In buy to enhance the axle and suspension top quality, boost buyer auto experience, reduce after-product sales routine maintenance fees, fully find out from domestic and overseas superior axle technologies, specifically in the axle wheel edge special innovation, from grease lubricated wheel edge, to oil lubricated wheel edge, and then to the maintainance free axle ans suspension wheel edge, when compared with the prior era, there is a qualitative leap. Between them, there are 2 kinds of servicing-totally free wheel edge: oil lubrication maintenance-free (normally 500,000 km upkeep-free) and integrated maintenance-free (specifically bearing unit, 5 many years / 800,000 km upkeep-free).

Company Profile

 DUOYUAN Auto Gear CO.LTD

Duoyuan automobile equipment, handles an area of much more than one hundred acres and has above 300 workers, which includes much more than ninety professionals and complex personnel, more than 10 senior engineers, and far more than thirty intermediate engineers.

Our purpose is to become the third party professional car areas supplier with revolutionary spirit and major technology. With steady development and growth for sixteen a long time, we have cooperate with YuTong Team for a term method. Current solution industry quantity: Above 400,000 items of bus specific axles, in excess of 250,000 kits of bus air suspensions yearly manufacturing capacity: 100,000 parts of bus particular axle and fifty,000 kits of bus air suspensions. In 2018, our sales exceeded RMB 1.5 billion.

At current, our goods are mostly bus-oriented, delivering matching merchandise to full ranges of models this sort of as passenger bus, vacationer bus, group bus, community transportation bus, college buses and new energy bus Also, we are actively increasing truck and other industrial automobile marketplaces. Our products are bought to more than 130 nations and regions in the entire world these kinds of as Cuba, Venezuela, Russia, Iran and Saudi Arabia as elements of comprehensive vehicle.

In buy to understand a much better foreseeable future, we, by upholding the spirit of exploration, learn widely from others’ strong points and take in overseas and domestic superior experience, and attempt for the development of China’s automotive gear.

FAQ

Q:Are you buying and selling company or producer?

A: We are factory who have been specializing in creating and manufacturing axle and suspension for twenty a long time .
Q:Can your goods be tailored or modified?

A: We can style and create the axl and suspension according to customers’ specifications and automobile parameters .
Q: What is your conditions of payment ?
A: a hundred% Advance payment by T/T soon after signing the agreement.
Q: What is your phrases of packing?
A: Generally, we put buggy axle on Wood pallets,Extend movie set in wooden box . Or Consumer needed.
Q: How lengthy is your shipping and delivery time?
A: Generally it is 15-25 days if the products are in inventory. or it is 35-forty five days if the products are not in inventory, it is in accordance to
quantity.
Q: What is your axl sample plan?
A: We can provide the buggy axle sample if we have prepared elements in inventory, but the customers have to shell out the sample value and he courier price.You should contact with me with buggy axle.
Q. Do you check all your buggy axle ahead of shipping?
A: Yes, we have one hundred% test before delivery
Q: How do you make our enterprise lengthy-phrase and good relationship?
A:1. We preserve axle and suspension a very good top quality and aggressive cost to ensure our clients benefit
two. We respect each consumer as our buddy and we sincerely do organization and make close friends with them, no subject exactly where they arrive from.

After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)
After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are three main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
air-compressor

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
air-compressor

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join two heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new one or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.

China Bus Coach Front Axles Bus Parts Rear Axle Half Shaft for Electric Motor Drive Axle     drive shaft yoke		China Bus Coach Front Axles Bus Parts Rear Axle Half Shaft for Electric Motor Drive Axle     drive shaft yoke
editor by czh 2022-12-01